1. Skip to Menu
  2. Skip to Content
  3. Skip to Footer>

Openport 2.0 - Your key to tuning

From reflashing to logging to diagnostics, the Openport 2.0 can do it all with just a PC laptop and a USB port. Use it with our EcuFlash software for unlimited tuning and logging of Subarus, Mitsubishis, and an ever-expanding list of supported vehicles. The Openport's industry-standard SAE-J2534 interface can also be used with OEM reflashing software for any car sold in the USA since 2004.

A Smart Cable Means Faster Tuning.

The Openport 2.0 uses a built-in 32-bit ARM processor to allow fast communication with your ECU without burdening your PC - which means reliable faster reflashing and logging for you. Using built-in microSD slot, the Openport can log continuously from your ECU without a PC, day after day, to help work out those hard to replicate bugs in your tune.

EcuFlash - Freedom to Tune

EcuFlash is our free software used with the Openport 2.0 to give you the power to tune and reflash many Subaru and Mitsubishi vehicles. Unlike most commercial tuning solutions, EcuFlash doesn't limit how many cars you can flash, what parts of a ROM you can see, or what you can share with someone else. This ability to share information and ideas has helped found and build the OpenECU community of enthusiasts and professional tuners alike.

Look for integrated logging, OBD diagnostics, Honda, Nissan, and Mazda support coming soon!

Tighter Boost Control

Our 3-port boost solenoid upgrade along with EcuFlash tuning allows for consistent boost control at levels much higher than factory solenoid supports. This solenoid includes a harness compatible with Subarus and Evos.

  • image1
  • image3
  • image2
 

Attention!

The Tactrix shipping and support office will have reduced hours due to COVID-19 restrictions and the upcoming 4th of July holiday. Please see our home page for more details.

 

Tactrix

Short Term Closure

Tactrix will have reduced hours starting later on Thursday June 25th. We will be closed for shipping through the week ending July 3rd for the upcoming holiday. If you place an order during this time,it will be processed no later than the week of July 6th when we resume normal hours. On the day your order ships you'll receive an automated email with tracking information. This also means there will be delays in replying to your support questions. We thank you for your patience during this period. If you need to place an order inside the USA before we return, please consider purchasing our hardware from STM Tuned, a reliable distributor of our products. If you need the name of a recommended reseller outside the USA, please send us an email to support at tactrix dot com and we'll point you in the best direction we can.

EcuFlash 1.44.4799 Released

Go here to download and see what has changed.

We have moved!

Tactrix has moved its operations from Seattle to San Francisco. Our new address is

Tactrix Inc.
126 Russ St.
San Francisco, CA 94103-4010

We are excited about our move to San Francisco and the improvements in our products and service that our new employees will bring!

Our new building is solar powered and generates more power than we use, so we can save our CO2 production for going fast!